Flat wire

flat wire 1.16 years in this field 2.good quality 3.OEM service is available 4.Certification:3C,UL

flat wire

UL STYLE:2678

UL/CSA GRADE:2678 CSA Standard:C22.2 No. 210.2

Rate temperature:105°C Rate temperature:105°C

Rate voltage:150V Rate voltage:150V

Flame test:VW-1 Flame test:FT1,FT2

CONDUCTOR:STRANDED CONDUCTOR:SINGLE

AWG size:30AWG AWG size:30AWG

Number of stands in each conductor :7/0.102mm. Conductor:0.254mm

Number of strands in each conductor:7/0.102mm. Cross section area:98mil.

Lay of strands in each conductor:0.5inch at leat

Cross section area:98 mil.

INSULATION:

Material of insulation:polyvinyl chloride(PVC) deep gray and gray

Insulation thickness average:7mil.

Minimum insulation thickness:6mil.

PHYSICAL PROPERTIES:After 7 days air oven at 136°C

Average tensile strebgth:1500lbs/inch²

Percent of original:70% at least

Average elongation:200%

Percent of original:65% at least

ELECTRONIC CHARACTERISTICS:

Spark test:1500V Conductor resistance:Maximum361ohm/km

Dielectric strength test:Minimum 1500V in 1 minute Capacity:71pF/m(G-S-G) 47pF/m(G-S)

Conductor resistance:Maximum377ohm/km Characteristic Impedance:80ohm(G-S-G) 115ohm(G-S)

Insulation resistance:Minimum 1Gohm-m Propagation delay time :5.2ns/m

Capacity:75pF/m(G-S-G) 49pF/m(G-S)

Characteristic Impedance:72ohm(G-S-G) 113ohm(G-S)

Propagation delay time :5.4ns/m

Code No.	Number of Cores	Size of conductor			Thickness(mm+-0.05)	Width(mm)	PT(mm)	Allowable error(mm)
		(AWG)	Composition(solid/mm)
			Stranded Conductor	Solid Conductor
HM-68	68	30	7/0.102	0.254	0.66	43.18(1.7±0.01)	42.545(1.675±0.01)	±0.25
HM-80	80	30	7/0.102	0.254	0.66	50.80(2.0±0.01)	50.165(1.975±0.01)	±0.25
HM100	100	30	7/0.102	0.254	0.66	63.50(2.5±0.01)	62.865(2.475±0.01)	±0.25

USAGE:

Internal connection in computers,duplicators,fax machines,electronic games,interface cards and many other electronic equipment and devices.

CONSTRUCTION TABLE

Flat wire